Rasbpberry Pi

[Guide] Installing dashing Dashboard on Raspberry Pi

This guide is inspired by this guide with some modifications. Before anything, lets have look at what is needed for this guide: Raspberry Pi (We used a Raspberry Pi 2 Model B) Monitor (We used an old Acer with only VGA, so maybe you need a HDMI-to-VGA adapter) Raspberry Pi power supply SD Card (We used an […]

Posted in News | Leave a comment

[Guide] Installing Docker Swarm on HypriotOS

Swarm and Machine This guide will setup a virtual environment with Docker Swarm on Raspberry Pis running HypriotOS. The guide is based on the following hypriot guide. If you don’t know what Docker Machine and Docker Swarm is, take a look at the Docker Machine introduction and the Docker Swarm tutorial or read the documentation for Machine and Swarm. Create ssh key for […]

Posted in News | Leave a comment

[Guide] Setting up a Kubernetes on ARM cluster

[Guide] Setting up a Kubernetes on ARM cluster This blog post will walk you through the steps of setting up kubernetes-on-arm that Luxas has created. Thanks to Luxas’ project it is pretty straightforward to get Kubernetes up and running on a Raspberry Pi. This guide will walk you through a fork of Luxas’ project, that contains minor adjustments to […]

Posted in News | Leave a comment

Are abstractions always a good thing?

in many cases they probably are. Cloud providers are abstracting more and more tasks. Provisioning and administration of servers and much more. It’s been a while since our last blog post and since then we have been doing a lot of research about the eligibility of a Raspberry Pi cluster and where it has its […]

Posted in News | Leave a comment

Installing a Kubernetes 1.4 cluster on Hypriot 1.1.1 with kubeadm

It’s been a while since our last blog post. However, we are back and again working with Kubernetes on a daily basis. This blog post will show you how to set up a Kubernetes 1.4 cluster with HypriotOS 1.1.1 and the new kubeadm tool. Prerequisites A couple of Raspberry Pis (minimum two) A switch to connect the […]

Posted in News | Leave a comment